This article provides a detailed introduction to the product characteristics of the Fenghua (FH) automotive thin film precision resistance AT series. The Fenghua AT series thin film automotive resistor is a resistor that meets the AEC-Q200 automotive industry certification. It has an ultra-low temperature coefficient and ultra-high precision resistance value, and has anti vulcanization characteristics. It uses special passivation materials, which have high temperature resistance, corrosion resistance, and high reliability. Fenghua thin film automotive resistance is also a type of high-precision thin film SMT resistance.
The main product features of the Fenghua (FH) automotive thin film precision resistance AT series are as follows:
1. Complies with relevant clauses of AEC-Q200 automotive standards
2. Electric temperature coefficient (± 25ppm/℃; ± 50ppm/℃) and high accuracy (± 0.1%~± 1.0%)
3. Adapt to reflow soldering and wave soldering
4. Compliant with RoHS directive requirements
5. Has anti vulcanization performance
6. Special passivation materials with good moisture resistance, corrosion resistance, and high reliability
The main product selection parameters and characteristics of the Fenghua (FH) car specification thin film precision resistance AT series:
1. Volume: 04020608051206121020102512
2. Resistance range: According to E24, E96, etc
3. Resistance value accuracy range: ± 0.1%~± 1%
4. Rated power range: 1/16W~1/2W
5. Temperature characteristics: TCR: ± 25ppm/℃, ± 50ppm/℃
List of corresponding volume selection parameters for the Fenghua (FH) automotive thin film precision resistance AT series:
| Type | Rating Power at 70 ( W ) ℃ |
Limiting Element Voltage ( V ) |
Max .Overload Voltage ( V ) |
Resistance Range | T.C.R | |||
| ±0.1% | ±0.25% | ±0.5% | ±1% | (PPM/ ) | ||||
| 0402 | 1/16 | 25 | 50 | 10 ~30k Ω Ω | ± ±25 50 | |||
| 0603 | 1/10 | 75 | 150 | 10 ~100kΩ Ω | ± ±25 50 | |||
| 0805 | 1/8 | 150 | 300 | 10 ~100kΩ Ω | ± ±25 50 | |||
| 1206 | 1/4 | 200 | 400 | 10 ~510kΩ Ω | ± ±25 50 | |||
| 1210 | 1/4 | 200 | 400 | 10 ~510kΩ Ω | ± ±25 50 | |||
| 2010 | 1/3 | 200 | 400 | 10 ~510kΩ Ω | ± ±25 50 | |||
| 2512 | 1/2 | 200 | 400 | 10 ~510kΩ Ω | ± ±25 50 | |||
The above is a detailed introduction to the characteristics and selection parameters of the Fenghua (FH) automotive thin film precision resistance AT series products. The products are still being updated. If you need more detailed product information and product ordering, please consult online customer service.
